KPB-2F13?KPB-2F18?KPB-2F25 兩面吸附永磁夾具日本KANETEC

型號：KPB-2F13?KPB-2F18?KPB-2F25
品牌：日本KANETEC強力
名稱：兩面吸附永磁夾具

［用途］
在電火花、磨削加工中，可夾持工件。在組裝作業和輕加工時，可作為夾具使用。

［特點］
●屬兩面吸附型，對兩面可分別進行ON/OFF 切換（2F）。
●通過磁鐵的ON/OFF（2F），以固定在作業臺上。
●可作側面的吸附（ON/OFF 切換操作面）（2F）。
●固定在作業臺時，使用安裝面的螺絲孔。此外，也可通過磁鐵吸盤吸附進行固定（1F）。
●兩側面均持有操作部，因此能輕松地進行切換作業。
●重量輕，能簡單地調節位置。
●可拆卸操作盤，因此不會妨礙作業。
●2 臺/1 套，已同時進行了精工。
●屬防滴、耐油結構，可在液體中使用。

KPB DOUBLE-FACE HOLDING PERMANENT MAGNETIC BLOCK


［Application］
These blocks can hold workpieces during electric discharge machining and grinding. They can also be used as holding tools for assembly and light duty machining.

［Features］
●The both sides can hold workpieces and can be turned on and off individually. (2F type)
●They are secured to the work table by turning on and off the magnet. (2F type)
●The side faces (ON/OFF switchover face) can also hold workpieces. (2F type)
●They are secured to the work table using tapped holes provided on the mounting face. They can also be secured by having them held by a magnetic chuck. (1F type)
●The operation part is provided on both side faces to facilitate on/off operation.
●Light weight for easy positional adjustment.
●The operating handle is detachable and does not hinder the work.
●One set of two blocks has been machined and finished together.
●They are of drip-proof and oil-resistant construction to allow them to be used in fluid.